Home >> News
    • 20



    • 7BBL unitank installed in Texas, USA
  • 7BBL unitank installed in Texas, USA

    ♦ Function:Wort Fermentation or maturation ♦ Tank Capacity: 1000L (+25% Headspace minimum) ♦ Interior Shell: SUS304 full welded; TH=3mm ♦ Exterior Shell:SUS304 full welded; TH=2mm ♦ 100% TIG welding with pure argon gas shield ♦ Interior Finish: Sanitary 2B finish, Pickled and Passivated; (8K Mirror finish optional) ♦ Exterior Finish: Oil brushed finish(2B, 8K Mirror finish optional) ♦ Interior full polished to 0.2~0.4 μm without dead corner ♦ Insulation: TH=80mm with low thermal conductivity PU ♦ Cooling: 35% Glycol liquid -5℃ ♦ Cooling Jacket: Dimple plate on bottom and side wall, welded without over burning ♦ Top mounted double clamp 360° rotary CIP spraying ball and port, 1pcs ♦ CIP arm with four-way connection and butterfly valve ♦ CO2 blow-off arm with butterfly valve (Removable) ♦ Mechanical safe valve PVRV 2bar/30psi on top (1bar/15psi available) ♦ Full sanitary sampling valve with EPDM seal ♦ Hydraulic shock pressure gauge on CIP arm (Diaphram type for optional) ♦ Horizontal mounted rotating racking arm and port in cone with butterfly valve ♦ Discharge arm with butterfly valve, Removable and easy to clean ♦ Sanitary welded thermowell for high accuracy temperature sensor 1pcs ♦ Dry hopping port 4'' with solid end cap (Hops pitching tank for optional) ♦ Glycol water in/out port on side wall, Thick wall pipe thread (Top or bottom design available) ♦ Glycol water in/out port on cone, Thick wall pipe thread (Top or bottom design available) ♦ 4pcs completely SUS304 legs with braces ♦ 4 sets heavy duty foot pad with up-down and slop adjustable +86-17753172875 +86-17753172875 +86-17753172875

Power by: sitemap